Working with the notebook
Setting up WLAN access
• Requirement: A WLAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
Access via UMTS
You can purchase the accessories f or UMTS reception from your retailer
or your Fujitsu Technology Solutions dealer.
If you have ordered a UMTS m o dule, you r device will already be
prepared w hen you receive it.
You will find information on establishing the conne ction with the UMT S
network in the documentation for the hardware used.
Your device can con
nect with the Internet via UMTS. To do th is, use one of
the following type
s o f connection:
• USB dongle
a USB stick with your mobile phone pro vider’s SIM card
• a mobile e nd-de v
ice (e.g. mobile phone) with Bluetooth connection
• a mobile en d-device (e .g. mobile phone) with data cable
Ethernet and LAN
EthernetLAN
The internal
network module of your notebook supports Ethernet LAN. You can use it to
establish a
connection to a local network (LAN = Local Area Network).
2
1
► Connect the
network cable to the LAN
port of the n
otebook (1).
► Connect the network cable to your
network co nnection (2).
Your network administrator can help you to configure and use the LAN connections.
The network cable is not included in the delivery scope. This type of
cable can be obtained from a specialist dealer.
46 Fujitsu Technology Solutions
To Next Page
Loading...
Need help?
General