70
- Optical Drive
Removing Media
1 Push and release the eject button on the front of the optical drive. This will stop the drive and the holder tray
will come out of the LIFEBOOK notebook a short distance.
2 Gently pull the tray out until the disc can easily be removed from the tray.
3 Carefully remove the media disc from the holder tray.
4 Gently push the holder tray back in until you hear a click.
Using the Media Player Software
Starting a DVD Movie
1
Insert the DVD into the optical drive of the notebook. If the CD AutoRun feature activates, skip Step 2.
2 The first time you insert a movie into the DVD/CD-RW tray, you will be prompted to select what you want the
system to do when discs are inserted (e.g., start automatically or wait for a prompt). Until you make a selection,
you will receive the same prompt whenever you insert a disc.
Emergency Optical Drive Tray Release
If for some reason the eject button fails, you can open
the media tray with a paper clip or similar tool
inserted into the eject hole in the right side of the front
of the tray as shown in Figure 30. Straighten one side
of a paper clip and push it gently into the hole. The
tray will pop out.
This procedure will work whether the system is
running or not.
Figure 30. Emergency Tray Release
D
EPENDING UPON ITS CONFIGURATION, YOUR SYSTEM MAY NOT HAVE THE MEDIA PLAYER SOFTWARE
PRE-INSTALLED. IF IT IS NOT INSTALLED, REFERENCE THE DOCUMENTATION THAT ACCOMPANIES THE
MEDIA APPLICATION.
To Next Page
Loading...
Need help?
General