Working with the Tablet PC
Switching the Tablet PC off
Back up your data and close all applications before you switch off your
device. Otherwise data might be lost.
► Shut down the operating system correctly.
Switchingoff
► If the Tab let P C does not switch off automatically, press the ON/OFF button for about five seconds.
Handwriting recognition
For d etailed information on handwriting recognition, see the documentation on your operating system.
At present, handwriting recognition un der Windows supports the following languages:
English, German, French, Italian, Japanese, Korean, Chinese (traditional and s implified), Dutch,
Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish,
Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian.
Under Windows you can set the required language under Control Panel –
Time, Language and Region – Language.
To uch screen
Tou chs cr ee nNotes
Information on screen resolution can be f ound in the section "Screen resolutions
for integrated screen and external screens", Page 72.
High-qualit
y LC D screens (TFT) are installed in Fujitsu Tablet PCs. For technical reasons,
these scree
ns are manufactured for a certain resolution. An optimum and sharp image can
only be en su
red with the resolution inte nded for the particular screen. A screen resolution
which diff
ers from the specification can result in an unclear image.
The screen
resolution of your Tablet PC’s touchscreen is o ptima lly set at the factory.
With the p
resent standards of produ ction te chn olog y, absolutely fl awless screen images
cannot be
guaranteed. There may be a few constantly light or dark pixels (picture
elements
) on the screen. The maximum permitted number of such faulty pixels is
specifie
d in the international standard ISO 9241-307 (Class II).
Exampl
e:
A monit
or with an HD resolution of 1280 x 1024 has 1,310,720 pixels. Each pixel consists of three
subpix
els (red, green and blue), so there are almost 3.9 million subpixels in total. According to ISO
9241-
307 (class II), a maximum of 3 light and 3 dark pixels and in addition 7 light or 13 dark subpixels
or an e
quivalent mix (1 light subpixel counts as 2 dark subpixels) are allowed to be defective.
Fujitsu 23
To Next Page
Loading...
Need help?
General