EasyManuals Logo
Home>Fujitsu>Tablet>Q616

Fujitsu Q616 User Manual

Fujitsu Q616
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
Security functions
Password protection for the hard disk
Passwordprotect ion:
The hard disk p assword prevents unauthorised access to the hard disk drives
and is checked internally each time the system is booted. The prerequisite for
this is that you have assigned at least the supervisor password.
Activating hard disk protection
Call up the BIOS Setup and select th e Security menu.
If you have not assigned BIOS passwords yet, dene the supervisor and the user
password now, if desired (see "
Securit y functions", Page 45).
Mark the Hard Disk Security eld and press the Enter key.
In the Drive0 area mark the Set Master Password eld and press the Enter key.
Enter n ew Password then appears and you are asked to enter a password.
Enter the password and p ress the Enter key.
Conrm new Password requires y ou to conrm the password.
Enter the password aga in and press the Enter key.
Setup Notice: Changes have been saved is displayed to conrm that the
new password has been saved.
The eld Password Entry on Boot is set to Enabled by default. You can exit the BIOS
Setup once you have nished chan ging the settings.
From the Exit menu, choose the option Exit Saving Changes.
Press the Enter key and select Yes.
The Table PC reboots and your hard disk is now protected with a password. The
password prompt is enabled as soon as the Tablet PC has rebooted.
Deactivating hard disk protection
To cancel a password without setting a new one, proceed as follows:
Call up the BIOS Setup and select th e Security menu.
Mark the Hard Disk Security eld and press the Enter key.
In the Drive0 area mark the Set Master Password eld and press the Enter key.
You will be initially requested to enter the old password by the Enter current Password prompt.
You will then be requested to enter a new password by the Enter new Password prompt.
After p roviding the input, press the Enter key three times.
From the Exit menu, choose the option Exit Saving Changes.
Press the Enter key and select Yes.
The Tablet PC reboots and there is no longer any password pro tect ion for this hard disk.
Fujitsu 49

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu Q616 and is the answer not in the manual?

Fujitsu Q616 Specifications

General IconGeneral
BrandFujitsu
ModelQ616
CategoryTablet
LanguageEnglish

Related product manuals