Working with the Tablet PC
Access via UMTS / LTE
If you ordered an integrated UMTS/LT E module with your system, you can enjoy optimum
reception and maximum energy efficiency without any awkward cables or antennas.
An installed UMTS/LTE module is ready for immediate use.
If you did not o rder a UMTS / LTE module, you can purchase the accessories for UMTS /
LTE reception from y our retailer or your Fujitsu Technology Solutions dealer.
You will find information on establishing the connection with the UMTS / LTE network
in the documentation for the hardware used.
You r device can connect to the Internet via UMTS / LTE. To do this, use one
of the following types of connection:
• Integrated UMTS / LTE module (availability dependent on your model variant)
• a USB dongle (a USB stick with your mobile phone provider’s SIM card)
• a mobile end-device (e.g. mobile phone with Bluetooth or cable connection)
Ethernet and LAN (cradle only)
EthernetLAN
The internal network module of your Tablet PC supports Ethernet LAN. You can use it to
establish a connection to a local network (LAN = Local Area Network).
2
1
► Con nect the network cable to the LAN
port of the cradle (1).
► Con nect the network cable to your
network connection (2).
Your netwo
rk administrator can help you to configure and use the LAN connections.
The netwo
rk cable is not included in the delivery sco pe. This type of
cable can
be obtained from a specialist dea ler.
GPS
GPS
Whether your device has this function or not depends on the device configuration c hosen.
Fujitsu 35
To Next Page
Loading...
Need help?
General