Connecting external devices
Connecting USB devices
USBports
On the USB ports, you can connect external devices tha t a lso have a USB po rt
(e.g. a DVD drive, a printer, a scanner or a modem).
USB devices are hot-pluggable. This means you can connect and disconnect
devices while your operating system is running.
USB 1.x has a maximum data transfer rate of 12 M bit/s.
USB 2.0 has a data transfer rate of up to 480 Mbit/s.
USB 3.0 has a data trans
ferrateofupto5Gbit/s.
Additional informati
on can be found in the documentation for the USB devices.
► Connect the data cable to the
external device.
► Connect the data cable to the USB
port on the Tablet PC.
or
► Conne ct the data c able to a USB
port of the cradle.
Device d rivers
USB devices will be automatically recognised and installed by your operating system.
How to remove USB devices correctly
Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.
► Tap the symbol for safe remo val of the h ardware.
► Select the device which you want to shut down and remove.
► Ta p OK.
Wait for the dialogue box which tells you that it is now safe to remove the device.
56 Fujitsu
To Next Page
Loading...
Need help?
General