Specifications of S1300i
The following table summarizes the specifications of the ScanSnap.
Item Specification
Product name ScanSnap S1300i
Scanning method Automatic Document Feeder (ADF), simultaneous duplex scanning
Scanning color mode Simplex/duplex, color/gray/black and white/auto (automatic color,
gray, and B&W detection)
Optical system/image sensor Equal-magnification optics/color CIS × 2 (front × 1, back × 1)
Light source 3 color LED (Red/Green/Blue)
Scanning speed (A4
portrait)
Power cable
connection
Automatic resolution: 6 sheets/minute
Normal: 12 sheets/minute
Better: 9 sheets/minute
Best: 6 sheets/minute
Excellent: 1 sheet/minute
USB bus power cable
connection
Automatic resolution: 2 sheets/minute
Normal: 4 sheets/minute
Better: 3 sheets/minute
Best: 2 sheets/minute
Excellent: 1 sheet/minute
Scan area Refer to "Documents to Scan (S1300i)" (page 299)
Document thickness
Number of sheets allowed to be loaded Up to 10 sheets
A4: 80 g/m
2
(20 lb)
Interface USB USB 2.0/USB 1.1 (connector: USB Mini-B type) (*1)
Input power Voltage 100 to 240 V ±10% or 5 V (USB bus power)
Phase Single phase
Frequency range 50/60 Hz
Power consumption Power cable
connection
During operation: 9 W or less
During sleep mode: 2.6 W or less
USB bus power cable
connection
During operation: 5 W or less
During sleep mode: 2 W or less
Temperature/humidity
allowable ranges
Temperature During operation: 5 to 35 degrees C/41 to 95 degrees F
During standby: -20 to 60 degrees C/-4 to 140 degrees F
During storage/transportation: -20 to 60 degrees C/-4 to 140 degrees
F
Humidity During operation: 20 to 80%
During standby: 8 to 95%
During storage/transportation: 8 to 95%
Outer dimensions (Width × Depth × Height) Min.: 284 × 99 × 77 mm/11.18 × 3.90 × 3.03 in. (when the ADF
paper chute (cover) is closed)
Max.: 284 × 231 × 240 mm/11.18 × 9.09 × 9.45 in. (when the ADF
paper chute (cover) is open and the extension is extended)
Weight 1.4 kg (approx. 3.09 lb)
Specifications of the ScanSnap
510