Working with the Tablet PC
Conf guring WLAN access
• Requirement: A WLAN is available and you have the necessary access data on hand.
Information on configuring WLAN access can be found in the
documentation for your operating system.
Further information on WLAN and Bluetooth
For f
urther information about WLAN or Bluetooth, please refer to the
appendix of this Operating Manual.
For WLAN specifications, see chapter "WLAN specifications", Page 76.
-Access via UMTS
-Access via Wireless
-WAN
-Access via 4G
Ethernet and LAN (docking cradle only)
EthernetLAN
The internal network module of your Tablet PC supports Ethernet LAN. You can use it to
establish a connection to a local network (LAN = Local Area Network).
2
1
► Connect the network cable to the LAN
port of the cradle (1).
► Connect the network cable to your
network connection (2).
Your network administrator can help you to configure and use the LAN connections.
The network cable is not included in the delivery scope. This type of
cable can be obtained from a specialist dealer.
Fujitsu 37
To Next Page
Loading...
Need help?
General