16
3.3 Adjustment for Transmitter Unit / Telesounder/
Picture Recorder
When the transmitter unit (ETR-2D etc.), video sounder, telesounder (TS-50/80/7000/8000)
or picture recorder (MT-12) is connected, do the following adjustments.
Note 1: For FCV-1500, install the EXIF Board assy (option) before the connection.
Note 2: For FCV-1500M, only master ship is available to connect to the telesounder. The
picture recorder is not available to record echo sounder signal, playback only.
Transmitter/video sounder
1. Select FUNCTION SETTING from the SYSTEM menu and press the [MENU] key.
DEPTH UNIT : m ft
fa hiro P/B
DEPTH SCALE : RIGHT CENTER OFF
SCREEN DIVISION : VERT HOR
PICT ADVNC DIR : LEFT RIGHT L/R
A-SCOPE DISP : 1/4 1/2
SONDE TEMP DISP : 1/4 1/2
ZOOM DISP : FULL 1/2
PIC RECALL DISP : FULL 1/2
PWR REDUCT (HF)* : OFF ON
PWR REDUCT (LF)* : OFF ON
TX SYNC : INTERNAL EXTERNAL
VERT VRM UNIT : TIME DISTANCE
TEMP UNIT : C F
TEMP INPUT : SONDE SENSOR NMEA
TEMP ADJUST : +0.0 F (-20~+20)
NL METHOD : CORREL-1 CORREL-2
ZOOM MARKER : OFF ON
TS OUTPUT : OFF LOW-FREQ HI-FREQ
FACTORY SETTING : YES NO <Valid for this page>
(Select ’YES’ & Press [MENU] to default setting.)
[▲] [▼] : Select item.
[ ] [ ] : Change setting. (or [-], [+])
[MENU] : Return to SYSTEM MENU.
*Not available on FCV-1500M.
Figure 3-5 FUNCTION SETTING menu
2. Select TS OUTPUT with [▲]/[▼].
3. Select “OFF” with [t].
To Next Page
Loading...
