1. INITIAL SETTING AND ADJUSTMENT
1-65
4. Select the appropriate equipment on the menu bar to activate the alert for each
equipment. For example, the alert number “153” can be activated for No.1 ECDIS
and deactivated for No.2 ECDIS. The following figure is the sample when the No.1
ECDIS is selected. The alerts are listed based on the alert definition of the equip-
ment.
5. Check the checkbox of the alert to activate.
6. To save the configuration, perform a consistency check, then save the configura-
tion data on the [Save and Sync] menu.
1.8.6 How to add an alert definition
An alert definition can be added newly. The maximum number of alert definition is
1,000.
1. Click the [New Alert] button on the alert
definition window referring to the figure
in step 2 of section 1.8.5. The [New
Alert] window is shown.
Note: The 1,000 alert definitions have
been registered, the message "Too
many alert. Please delete any alert." is
shown. If this occurs, delete any alert
definition to make space for the new
alert definition.
2. Set the options referring to the table shown below.
16 [Details] button Show the detail window for the alert. See section 1.8.7.
17 [Edit] button Edit the alert number. This appears when the alert notifica-
tion sentence is ALF.
18 [Import] button Import the alert definition for currently displayed equipment.
19 [Export] button Export the alert definition for currently displayed equipment.
Item Remarks
[Alert Name] (ALR)
[Alert Description] (ALF)
Enter the alert name (max. 64 characters).
[Alert ID] (For ALF) Enter the alert number for the ALF sentence.
[Instance ID] (For ALF) Enter the Instance ID.
[Internal Notify No.] Enter the notify number of processor unit. For sensors, this
is automatically numbered.
Item Remarks
To Next Page
Loading...
Need help?
General
