3. SYSTEM INITIALIZATION
3-4
7. Select [Window Color] then press the Enter key. (The 2nd DTE does not have the
menu item [Brightness].)
8. Set the window colors as follows:
1) [Select Preset] provides three preconfigured window color sets. Use one of
these sets, or continue this procedure to customize window colors. Preset 1
and 2 are daytime modes (bright environment), and Preset No.3 is for night-
time use (dark environment).
The brightness setting for each preset is as follows:
Preset 1: Brightness 10
Preset 2: Brightness 10
Preset 3: Brightness 5
2) Select [Window]. Use ← or → key to select the window for which to select col-
or.
Base Window: Standby display
RCV Message Display: Receive message display
EGC Message Display: EGC message display
EDIT1 - EDIT2: Editor screens 1 and 2
Function: Menu
Sub Menu 1 - Sub Menu 4: Sub menus 1-4
Message: Status message
Window Color Setup
Select Preset 1 2 3
Load Default
- - - - - - - - - - - - - - - - - - - - - - -
Edit Color
Window [ Base Window ]
Fore Color [ BLACK ]
Back Color [ WHITE ]
Brightness 0 1 2 3 4 5 6 7 8 9 10
- - - - - - - - - - - - - - - - - - - - - - -
To Change: ENTER To Change Value:L<=>R
To Next Page
Loading...
Need help?
General
