3. SYSTEM INITIALIZATION
3-5
3) Select [Fore Color].
4) Use ← or → key to select a color.
5) Select [Back Color].
6) Use ← or → key to select a color.
7) To select colors for other windows repeat steps 2)-6).
8) [Brightness] shows current brightness setting. For how to adjust brightness,
see section 2.1.2. See the table on the next page for the default settings for
each preset.
Note: To restore all default color settings, select [Window Color Setup] from
the [Terminal Setup] menu, select [Load Default], press the Enter key then
press the Enter key again.
1:
2:
|
|
|
|
|
|
|
MENU
< [1] UNTITLED1 >
EDIT
BASE WINDOW
CAUTION
MESSAGE
File Edit Transmit EGC Reports Logs Options Setup Distress StopAlarm
To Next Page
Need help?
General
