Furuno RC-1800T User Manual

2-25
Editing the station list
1. Press [F8], [9] and [1] to display the Station List.
Setup
Configuration
Station List
01
02
03
04
05
06
07
08
abc
xyz
Seagull
Ctrl+P: print
E-Mail
E-Mail
TELEX
abc@ furuno.co.jp
xyz@ furuno.co.jp
584 463609999
Station Name Type Code, ID / Address
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
Figure 2-42 Station list
2. Press [
/
] and [Enter] to select the station you want to edit.
3. Press [Enter] to open the station name window.
4. To delete a station, press [Backspace] to erase station name, and
then press [Enter].
5. To edit a station name, place the cursor on the character you want
to edit. Press [Backspace] to erase that character, then enter cor-
rect character.
6. Press [Enter] to save changes.
7. If necessary, select other item, edit it and press [Enter].
8. To return to the standby display, press [Esc] four times.
Printing the station list
1. Press [F8], [9] and [1] to display the Station List.
2. While pressing and holding down [Ctrl], press [P].
No.
01
02
03
Name
abc
xyz
Seagull
Type
E-Mail
E-Mail
TELEX
Dest, ID, Modem / Address
abc@ furuno.co.jp
xyz@ furuno.co.jp
584 463609999
Station List ( Printed at 97-08-04 02:38 )
Remarks
Station Name Subscriber s Number
Country Code
Figure 2-43 Sample station list printout
3. To return to the standby display, press [Esc] three times.

Furuno RC-1800T Specifications

General

Brand	Furuno
Model	RC-1800T
Category	Receiver
Language	English