Furuno RC-1800T User Manual

2-6
2.6 Starting, Stopping Scanning DSC Routine
Frequencies
Press the [6/SCAN] key at the DSC standby screen to start or stop scanning DSC routine
frequencies. The DSC routine frequencies to scan can be selected through the menu. Note that
scanning of DSC distress frequencies cannot be stopped.
35˚00.000N 135˚00.000E 23:59
WATCH KEEPING
2187.5
4207.5
6312.0
8414.512577.0
DISTRESS
ROUTINE
2177.0
4219.5
6331.0
8436.512657.0
VOLUME
32
AUTO ACK
DSC routine frequency
currently being
scanned is highlighted.
16804.5
16903.0
DSC distress frequency
currently being
scanned is highlighted.
Note:
DSC routine frequencies may not be received when optional receiver board (for receiving
DSC routine frequencies) is installed and you receive a distress signal when you are close to the
sender of the frequency.

Furuno RC-1800T Specifications

General

Brand	Furuno
Model	RC-1800T
Category	Receiver
Language	English