2. HOW TO SETUP THE MENU
15
2.5 [Port Setup] Tab (SCX-21 Only)
You can setup output data format for each serial channel (data port) on the SCX-21.
Note: The [Port Setup] tab is not used in the SC-33 and SCX-20. You can open the tab, however
all setting items are grayed out and cannot be adjusted.
Menu item Remarks
Port1 Setup/
Port2 Setup/
Port3 Setup
Format Select the data format for output data. Select the appropriate version
according to the connected equipment.
Talker
Select the talker for the output data from the SATELLITE COMPASS
™
.
Baud Rate
Select the baud rate of the SATELLITE COMPASS
™
.
Note: When the baud rate setting is changed from 38,400 bps to 4,800
bps and communication load rate exceeds 100%, the following mes-
sage appears. In this case, adjust the output sentence settings so that
the communication load rate is 100% or less.
To Next Page
Loading...
Need help?
General
