Garmin GEA 71 User Manual

190-02692-00 Rev. A
Garmin G100 Pilot’s Guide for the Piper PA-32 Saratoga 69
FLIGHT INSTRUMENTS
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
Figure 2-31 Synthetic Vision Imagery
SVT OPERATION
SVT is activated from the PFD using the softkeys located along the bottom edge of the display. Selecting the
softkeys turns the related function on or off. When SVT is enabled, the pitch scale increments are reduced to
10 degrees up and 7.5 degrees down.
SVT functions are displayed on three levels of softkeys. The PFD Softkey leads into the PFD function
Softkeys, including Synthetic Vision. Selecting the SYN VIS Softkey displays the SVT feature softkeys. The
softkeys are labeled PATHWAY, SYN TERR, HRZN HDG , and APTSIGNS. The BACK Softkey returns to
the previous level of softkeys. Synthetic Terrain must be active before any other SVT feature may be activated.
HRZN HDG , APTSIGNS, and PATHWAY Softkeys are only available when the SYN TERR Softkey
is activated (gray background with black text). After activating the SYN TERR Softkey, the HRZN HDG ,
APTSIGNS, and PATHWAY softkeys may be activated in any combination to display desired features. When
system power is cycled, the last selected state (on or off) of the SYN TERR, HRZN HDG , APTSIGNS, and
PATHWAY softkeys is remembered by the system.
Activating and deactivating SVT:
1) Press the PFD Softkey.
2) Press the SYN VIS Softkey.
3) Press the SYN TERR Softkey. The SVT display will cycle on or off with the SYN TERR Softkey.
Activating and deactivating Pathways:
1) Press the PFD Softkey.
2) Press the SYN VIS Softkey.

Garmin GEA 71 Specifications

General

Brand	Garmin
Model	GEA 71
Category	Avionics Display
Language	English