Garmin GEA 71 User Manual

190-02692-00 Rev. A
Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga 309
HAZARD AVOIDANCE
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
SELECTING THE STORMSCOPE PAGE
Stormscope lightning data can be displayed at the ranges of 25 nm, 50 nm, 100 nm, and 200 nm.
Adjusting the Stormscope Map Range:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the MAP - STORMSCOPE® Page.
3) To change the map range, turn the Joystick clockwise to zoom out or counter-clockwise to zoom in.
Figure 6-52 MAP - STORMSCOPE® Page
Changing between ‘cell’ and ‘strike’ mode:
1) Select the MAP - STORMSCOPE® Page.
2) Press the MODE Softkey. The CELL and STRIKE softkeys are displayed.
3) Press the CELL Softkey to display ‘CELL’ data or press the STRIKE Softkey to display ‘STRIKE’ data. ‘CELL’ or
‘STRIKE’ is displayed in the mode box in the upper left corner of the Stormscope Page.
4) Press the BACK Softkey to return to the MAP - STORMSCOPE® Page.
Or:
1) Select the MAP - STORMSCOPE® Page.
2) Press the MENU Key.
3) Turn the small FMS Knob to choose between ‘CELL’ and ‘STRIKE’ options.
4) When an item is selected, press the ENT Key.
If heading input is lost, strikes and/or cells must be cleared manually after the execution of each turn. This is
to ensure the strike and/or cell positions are depicted accurately in relation to the nose of the aircraft.

Garmin GEA 71 Specifications

General

Brand	Garmin
Model	GEA 71
Category	Avionics Display
Language	English