190-02692-00 Rev. A
Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga
129
AUDIO PANEL AND CNS
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
Pressing the BACK Softkey
returns to the top-level softkeys.
ALERTS
ALERTSBACKBKSP
IDENT
76543210
STBY ON
ALTVFR
CODE
IDENT BACK
XPDR
IDENT
Pressing the BACK Softkey returns to the mode selection softkeys.
TRANSPONDER MODE SELECTION
Mode selection can be automatic (Altitude Mode) or manual (Standby, ON, and Altitude Modes). The
Standby
,
On,
and
ALT
softkeys can be accessed by selecting the
XPDR
Softkey.
Selecting a transponder mode:
1) Select the
XPDR
Softkey to display the Transponder Mode Selection softkeys.
2) Select the desired softkey to activate the transponder mode.
STANDBY MODE (MANUAL)
NOTE: In Standby Mode, the IDENT function is inhibited.
Standby Mode can be selected at any time by pressing the
STBY
Softkey. In Standby, the transponder does
not reply to interrogations, but new codes can be entered. When Standby is selected, a white
STBY
indication
and transponder code appear in the mode field of the Transponder Data Box.
STBY Mode (white code
number and mode)
Figure 4-33 Standby Mode
To Next Page
Loading...
Need help?
General
