Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga
190-02692-00 Rev. A192
FLIGHT MANAGEMENT
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
The Smart Airspace function de-emphasizes airspaces above or below the current aircraft altitude. The function
does not require the aircraft present position or flight path to enter the lateral boundaries of the airspace. If the
current aircraft altitude is within 1100 feet of the vertical boundaries of the airspace, the airspace boundary is
shown normally. If the current aircraft altitude is not within 1100 feet of the vertical boundaries of the airspace,
the airspace boundary is shown subdued.
Figure 5-45 Smart Airspace
Smart Airspace Off Smart Airspace On
Turning smart airspace on or off:
1) Use the FMS Knob to select the MAP – NAVIGATION MAP Page.
2) Press the MENU Key, and press the ENT Key. The cursor is placed in the GROUP Box.
3) Turn the small FMS Knob to highlight the ‘Aviation’ in the GROUP Box and press the ENT Key.
4) Turn the large FMS Knob to highlight the SMART AIRSPACE Field.
5) Turn the small FMS Knob clockwise to turn smart airspace On or counterclockwise to turn smart airspace Off.
6) Push the FMS Knob to remove the flashing cursor.
To Next Page
Loading...
Need help?
General
