Garmin GIA 63W User Manual

Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga
190-02692-00 Rev. A
344
HAZARD AVOIDANCE
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
Displaying traffic information (PFD Inset Map):
1) Press the INSET Softkey.
2) Press the TRAFFIC Softkey to display traffic data on the inset map (TRFC-1).
3) Press the softkey again to display the traffic-only inset (TRFC-2).
4) Press the softkey again to remove traffic data.
The MAP - NAVIGATION MAP Page Setup Menu provides a means in addition to the softkey for enabling/
disabling display of traffic. The setup menu also controls the map range settings above which traffic data
(symbols and labels) are decluttered from the display. If a map range larger than the map range setting is
selected, the data is removed from the map. Maps besides the Traffic Map Page use settings based on those
selected for the MAP - NAVIGATION MAP Page.
Customizing traffic display on the MAP - NAVIGATION MAP Page:
1) Select the MAP - NAVIGATION MAP Page.
2) Press the MENU Key.
3) With ‘Map Setup’ highlighted, press the ENT Key.
4) Turn the small FMS Knob to select the ‘Traffic’ Group and press the ENT Key.
5) Turn the large FMS Knob or press the ENT Key to scroll through product selections.
• TRAFFIC – Turns the display of traffic data on or off
• TRAFFIC MODE – Selects the traffic mode for display; select from:
- All Traffic - Displays all traffic
- TA ONLY - Displays Traffic Advisories only
• TRAFFIC SMBL – Selects the maximum range at which traffic symbols are shown
• TRAFFIC LBL – Selects the maximum range at which traffic labels are shown (with the option to turn off)
6) Turn the small FMS Knob to scroll through options for each product (ON/OFF, range settings, etc.).
7) Press the ENT Key to select an option.
8) Push the FMS Knob or CLR Key to return to the MAP - NAVIGATION MAP Page with the changed settings.
MAP - TRAFFIC MAP PAGE
The MAP - TRAFFIC MAP Page is specialized to show surrounding TIS traffic data in relation to the aircraft’s
current position and altitude, without clutter from the basemap. It is the principal map page for viewing TIS
traffic information. Aircraft orientation on this map is always heading up unless there is no valid heading. Map
range is adjustable with the Joystick from two to 12 nm, as indicated by the map range rings.
The traffic mode is annunciated in the upper left corner of the MAP - TRAFFIC MAP Page. When the aircraft
is on the ground, TIS automatically enters Standby Mode. Once the aircraft is airborne, TIS switches from
Standby to Operating Mode and the system begins to display traffic information. Refer to the System Status
discussion for more information.

Garmin GIA 63W Specifications

General

Brand	Garmin
Model	GIA 63W
Category	Avionics Display
Language	English