190-02692-00 Rev. A
Garmin G100 Pilot’s Guide for the Piper PA-32 Saratoga
64
FLIGHT INSTRUMENTS
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
Figure 2-26 Omni-bearing Selector (OBS) Mode
Pressing the OBS
Softkey Again
Disables OBS Mode
Extended
Course
Line
GPS
Selected
OBS Mode
Enabled
Pressing the OBS
Softkey Enables OBS
Mode
Enabling/disabling OBS Mode while navigating a GPS flight plan:
1) Press the OBS Softkey to select OBS Mode.
2) Turn the CRS Knob to select the desired course to/from the waypoint. Push the CRS Knob to synchronize the
Selected Course with the bearing to the next waypoint.
3) Press the OBS Softkey again to return to automatic waypoint sequencing.
As the aircraft crosses the missed approach point (MAP), automatic approach waypoint sequencing is
suspended. ‘SUSP’ appears on the HSI at the lower right of the aircraft symbol in place of ‘OBS’ and the
OBS
Softkey label changes to SUSP. Pressing the SUSP Softkey resumes automatic sequencing of approach
waypoints.
Figure 2-27 Suspending Automatic Waypoint Sequencing
Pressing the SUSP
Softkey Suspends
Waypoint Sequencing
SUSP
Annunciation
To Next Page
Loading...
Need help?
General
