Garmin GPSMAP 62 User Manual

46 GPSMAP 62/62s Owner’s Manual
Appendix
EN
Troubleshooting
Problem Solution
The screen or buttons do
not respond� How do I
reset the device?
1� Remove the batteries�
2� Reinstall the batteries�
NOTE: This does not erase any of your data or settings�
I want to reset all the
customized settings
back to the factory
defaults�
From the main menu, select Setup > Reset > Reset All
Settings�
My device does not
acquire satellite signals�
1� Take your device out of parking garages and away from tall
buildings and trees�
2� Turn on the device�
3� Remain stationary for several minutes�
The batteries do not last
long�
Decrease the backlight settings (page 39)�
How do I know my
device is in USB mass
storage mode?
On the device, a screen appears showing the Garmin logo and
the USB symbol� On your computer, you should see a new
removable disk drive in My Computer on Windows computers
and a mounted volume on Mac computers�
My device is connected
to the computer, but it
will not go into mass
storage mode�
You may have loaded a corrupted le.
1� Disconnect the device from your computer�
2� Turn off the device�
3� Press and hold the Rocker while you connect the device to
your computer�
Continue pressing the Rocker for 10 seconds or until the
device goes into mass storage mode�
190-01215-25_0A.indd 46 2011/3/22 下午 03:12:46

Garmin GPSMAP 62 Specifications

General

Brand	Garmin
Model	GPSMAP 62
Category	GPS
Language	English