190-01639-00 GSU 75 ADAHRS Installation Manual
Rev. 6 Page 3-3
3.3 Backshell Assembly and Installation
The GSU 75 connector kit includes a 78 pin D-sub backshell assembly. The D-sub configuration module
attaches to the backshell. The D-sub backshell (strain relief) give the installer the ability to quickly and
easily terminate shields. To assemble the backshell refer to the Jackscrew Backshell Installation
Instructions (190-00313-11) document. To assemble the Configuration Module refer to the Configuration
Module Installation into a Jackscrew Backshell (190-00313-10) document.
3.4 GSU 75/GMU 44 Interconnect Harness Fabrication Instructions
Refer to the GMU 44 Interconnect Harness Fabrication Instructions (190-00313-04) document.
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
