WARNING
Only spare parts and accessories that are approved or supplied
by GE Healthcare may be used for maintaining or servicing
ÄKTAprocess.
WARNING
For continued protection against injury risks due to fluid jets, burst
pipes or potentially explosive atmosphere, the piping system must
be tested for leakage at maximum pressure:
•
After assembly or maintenance
•
Before operation or CIP
WARNING
To avoid injury when servicing the valves on 1" systems, make sure
that no body parts are caught when turning the valve assemblies.
CAUTION
Do not climb on any parts of ÄKTAprocess except where clearly
allowed. Follow local regulations and make sure that equipment
is properly secured when inspecting ÄKTAprocess at high level.
CAUTION
Decontaminate before service. Before performing any service
work on ÄKTAprocess make sure that the system has been properly
decontaminated.
ÄKTAprocess Operating Instructions 29-0252-49 AA 29
2 Safety instructions
2.1 Safety precautions
To Next Page
Loading...
Need help?
General
