2.2 Labels
Introduction
This section describes the various labels on ÄKTAprocess and their meaning.
System label
The illustration below shows an example of a system label.
The specific data shown on the system label below is only an example. Actual
data is specific for each individual system and may vary from system to system.
Note:
Year of manufacture:
Serial number:
Pneumatic supply:
Max system pressure/temperature:
Overall protection class:
6 bar g @ 40°C, 3 bar g @ 60°C
Supply voltage: 1Φ 100, 120, 200, 208, 230 or 240 VAC
IP 55
Frequency: 50-60 Hz
Max power consumption: 1500 VA
Protection class: IP 56 / NEMA 4X
GE Healthcare Bio-Sciences AB
Björkgatan 30
S - 751 84 UPPSALA
Sweden
N3732
Cabinet 10
20
ÄKTAprocess
ÄKTAprocess
The system label information is explained in the following table.
30 ÄKTAprocess Operating Instructions 29-0252-49 AA
2 Safety instructions
2.2 Labels
To Next Page
Loading...
Need help?
General
