HygroPro User’s Manual Page 19
Chapter 2: Operation
2.1 Powering Up & Programming
After the HygroPro has been installed as described in Chapter 1,
Installation, power may be applied to the unit. The transmitter
requires up to 60 seconds to initialize and begin normal operation.
The unit will meet its specified accuracy within 3 minutes.
Figure 7 below shows a close-up view of the HygroPro display and
keypad, and Figure 8 on the next page shows a complete menu map
of the HygroPro setup program.
Figure 7: HygroPro Display and Keypad
To Next Page
Loading...
Need help?
General
