HygroPro User’s Manual Page 21
Chapter 2: Operation
2.1.2 Keypad
After entering the setup program, the keys on the HygroPro keypad
(see Figure 7 on page 23) perform the following functions:
• enter - confirm a selection or move to the next screen
• escape - cancel a selection or move to the previous screen
• up - scroll upward through a list of options or increase the value of
a selected character
• down - scroll downward through a list of options or decrease the
value of a selected character
• left - move the cursor to the next character to the left
• right - move the cursor to the next character to the right
2.2 Basic Setup
The HygroPro transmitter is easily programmed to meet the user’s
requirements by referring to the menu map in Figure 8 on the
previous page and following the instructions in this section.
2.2.1 Unlocking the Display
Upon startup, the following screen appears on the HygroPro display:
The symbol in the upper right corner
indicates that the screen is locked.
To unlock the screen, press
escape, enter, escape.
To Next Page
Loading...
Need help?
General
