HygroPro User’s Manual Page 31
Chapter 2: Operation
2.3.1 Setting Up the Pressure/Temperature Displays (cont.)
To set the temperature display, enter
your password and use the arrow keys to
select Const Temperature. Press enter.
Use the same procedure to set the
temperature mode, and if Constant
Temperature is selected, to enter the
constant temperature value.
2.3.2 Entering Sensor Calibration Data
Enter your password and use the arrow
keys to scroll to Calibrate. Press enter.
Select Hygro Curve and press enter.
Select
Row1 and press enter.
To Next Page
Loading...
Need help?
General
