GE iBox User Manual

GE Grid Solutions
iBox/iBox Kit
Installation and Maintenance Guide
GE Information
994-0047-5.10-4
91
Restoring your SGConfig Project
Introduction
This procedure describes how to restore the SGConfig project that includes the
sample configuration provided with the iBox.
Procedure:
Restoring
your
SGConfig
Project
Step Action
1 In your Windows desktop, click Start, and then click Programs.
2
Click SGConfig, > SGConfig.
Result: SGConfig opens.
Importing the Factory Configuration
3 Click
GE
>
Archive
>
Project
>
Restore.
4 Click Restore.
Result: The Restore Project Details window appears:
5 Insert your configuration CD in the drive.
6
Navigate to the configuration file in the Archive File Name field.
7 Click OK.
Result: The configuration file uploads to your PC, and your project
appears in an SGConfig project tab.
Next Step
If you are operating the iBox Kit through a serial connection, the next step is:
• Configuring Project Properties - Serial on page 92
If you are operating the iBox Kit through a LAN connection, the next step is:
• Configuring Project Properties on page 98
Continued on next page

GE iBox Specifications

General

Brand	GE
Model	iBox
Category	Controller
Language	English