GE Analytical Instruments ©2006 DLM 14291 Rev. A
3-6
C O N T R O L
M E T H O D
S E T U P
S T A T U S
Fi
ure 3-8: Control Menu.
A N A L Y S I S
S T O P
S T A N D - B Y
Fi
ure 3-7:
nal
sis Menu
NOA in Start Mode
.
When the NOA is in the start mode, selecting Stop will:
• Display a confirmation screen “Are you sure? continue / stop”
• If the Stop option is selected, turn off the PMT, and ozone generator.
• Run the vacuum pump for 2 minutes to clear residual ozone from the
system.
• Turn off the vacuum pump.
Main Menu Options
The other options from the Main Menu are used to configure the NOA for the
different applications, perform the calibration for gas-phase measurements,
view warnings and errors, and view and install consumables.
Control
The Control Menu is used to setup the NOA for liquid or gas-phase
measurements, set the output intervals and the sensitivity of the NOA. The
setup can be stored as a method to permit easy switching between
applications. The Control Menu also permits viewing of the cooler temperature
To Next Page
Loading...
Need help?
General
