GE SF6 User Manual

Installation
Tightening torques
GE Information07- 2016 L31- 001EN/03
1/4
Presentation
Introduction
In the assembling with screws, all the fastening screws must be “greased”
before torque tightening.
Products used
The table below gives the list of the used products for the screws before tight-
ening :
Designation Grid Solutions
item
reference
Supplier Supplier item
reference
Grease
- 01835208
(1kg box)
MOBIL OIL
MOBILPLEX 47
MOBILUX EP3
Contact grease
- 01835118
(200g tube)
EPMF
CONTACT AL
HPG
Silicon grease
- 01835265
(100g tube)
SAMARO MOLYKOTE 111
Glue
- 01818327
(250 ml)
LOCTITE LOCTITE 225
In this module
This module contains the following topics :
Topic Page
Screw greasing before tightening 2
T ightening torques values 3

GE SF6 Specifications

General

Brand	GE
Model	SF6
Category	Circuit breakers
Language	English