Getinge Lucea 100 User Manual

Use
Mobile light
4
LUCEA 50-100
IFU 01741 EN 11
39 / 60
4.6 Mobile light
4.6.1 Moving a mobile light
WARNING!
Risk of electric shock
If the outlet is not disconnected properly, damage to the power supply cable
may occur and live parts may become accessible.
Do not pull on the power lead to disconnect the mains outlet.
WARNING!
Risk of inconvenience during use
If the mobile light is not properly positioned, it may move in an uncontrolled
manner.
Position the light by following the steps set out, to ensure that it is properly
stable.
1
2
3
4
Fig.31: Moving a mobile light
1. Wind the power lead around the power supply enclosure 1 .
2. Release the brakes by raising the levers on the casters 2 .
3. Lower the lighthead and then move the stand to the desired location 3 .
4. Upon reaching the desired location, lock the brakes by pushing down the levers on the
casters 4 .
5. Plug the power lead into the mains outlet.

Getinge Lucea 100 Specifications

General

Brand	Getinge
Model	Lucea 100
Category	Medical Equipment
Language	English