Gigabyte G292-2G0 User Manual

- 109 -
BIOS Setup
5-6 Boot Menu
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
message if the legacy drive(s) specied is not bootable.
Parameter
Description
Boot Conguration
Setup Prompt Timeout
Number of seconds to wait for setup activation key. 65535 (0xFFFF)
means indenite waiting.
Press the numeric keys to input the desired values.
Bootup NumLock State
Enable/Disable the Bootup NumLock function.
Options available: On, Off. Default setting is On.
Quiet Boot
Enable/Disable showing the logo during POST.
Options available: Enabled, Disabled. Default setting is Enabled.
Setup Flash
Press [Enter] to run setup ash.
Dump full Setup Data
Press [Enter] to dump full setup data to le.
Dump non-default Setup Data
Press [Enter] to dump non-default setup data to le.
Restore Setup Data
Press [Enter] to restore setup data from le.
Boot mode select
Selects the boot mode.
Options available: LEGACY, UEFI. Default setting is UEFI.

Gigabyte G292-2G0 Specifications

General

Brand	Gigabyte
Model	G292-2G0
Category	Server
Language	English