Gigabyte G292-2G0 User Manual

- 90 -
BIOS Setup
5-3-7 PCH Conguration
Parameter
Description
PCH Conguration
PCH SATA Conguration
Press [Enter] to congure advanced items.

SATA Controller
– Enable/Disable SATA controller.
– Options available: Enable, Disable. Default setting is Enable.

Congure SATA as
– Congures on chip SATA type.
– AHCI Mode: When set to AHCI, the SATA controller enables its AHCI
functionality. Then the RAID function is disabled and cannot be
access the RAID setup utility at boot time.
– RAID Mode: When set to RAID, the SATA controller enables both its
RAID and AHCI functions. You will be allowed to access the RAID
setup utility at boot time.
– Options available: AHCI, RAID. Default setting is AHCI.

Alternate Device ID on RAID
(Note 1)
– Enable/Disable Alternate Device ID on RAID mode.
– Options available: Enable, Disable. Default setting is Disable
.

SATA Port 0/1/2/3/4/5/6/7
– The category identies SATA hard drives that are installed in the
computer. System will automatically detect HDD type.
(Note 1) Only appears when HDD sets to RAID Mode.

Gigabyte G292-2G0 Specifications

General

Brand	Gigabyte
Model	G292-2G0
Category	Server
Language	English