Specifications
2 312001B
Specifications
This equipment is not intended for use with flammable or combustible materials used in places such as cabinet shops
or other “factory”, or fixed locations. If you intend to use this equipment in this type of application, you must comply
with NFPA 33 and OSHA requirements for the use of flammable and combustible materials.
Getting Started
1. Unfold handle (a)
and align as
shown.
2. Tighten wingnuts
(b).
3. Grasp cart handle
securely with one hand.
With the other hand lift
and pull Fold-n-Store
™
handle (a) located in front
of sprayer frame, toward
you. Lift up front of sprayer
until you hear a click and
the cart is locked in place.
4. Install hose rack (d) to
frame handle. Install lock
nuts. Tighten securely.
5. Secure power cord
in clip (e) located
beneath storage
compartment.
Model Name Series
Dispense
Rate gpm
(lpm)
Hose Length and
Diameter
Gun
Model
Maximum Working
Pressure
PSI MPa bar
M
AGNUM ProX7 A
0.31 gpm
(1.17 lpm)
1/4 in. X 50 ft
(6.4 mm x 15 m) SG20 3000 21 207
M
AGNUM ProX9 A
0.38 gpm
(1.44 lpm)
1/4 in. X 50 ft
(6.4 mm x 15 m) SG20 3000 21 207
a
b
ti9675a
c
ti9679a
d
ti9369a
ti9719a
e
To Next Page
Loading...
Need help?
General
