P a g e | 109
GDS3705 User Manual
Version 1.0.1.16
5) If the correct default password decoded entered within 60 seconds, GDS3705 will play a long beep
sound (advising correct operation), the device will reboot itself automatically.
6) If keypad entry time out (not finish the input within 60 seconds), the device will exit this password reset
mode automatically and stop the backlight flashing.
7) After successful password reset, operator will then be able to log into the GDS3705 webUI with default
password, all the configuration inside the device will be the same and will NOT be changed.
For example:
Decoding the string into digits and write to paper before doing the operation:
Device with last 6 MAC address: 33DDDD
Decoding the last 6 MAC to digits would be: 334444
Default password is: xwpxz6AA
Decoding the default password to digits would be: 2423162426611
1) Enter ***334444**# via keypad, get into the password reset mode, the keypad backlight will flash
quickly.
2) Within 60 seconds, enter 2423162426611#, the device will play one long beep then reboot itself.
3) Wait the device finishing boot up, log in the webUI using the default password, xwpxz6AA