Multi VRF Indoor
Unit Service Manual
111
4�6 Floor Standing Type
Removal and Assembly of electric box
Step Illustration Handling Instruction
1. Loosen the buckles on both
sides of the bottom panel.
Cut off the power supply of indoor
unit. Loosen the buckles on both
sides of the bottom panel.
2. Unscrew the screws on the
bottom panel and then pull it
out outwards.
Unscrew the screws on the bottom
panel and then pull it out outwards.
3. Unscrew the screws on the
electric box and then open the
cover of it.
Unscrew the screws on the electric
box and then open the cover of it.
4. Connect the power cord and
the connection pipe.
Connect the power cord and the
connection pipe.