Gree VERSATI III Series Service Manual

Unit Control
Notes:
①
In this case, three-way valve should be installed and should be complied with installation of this
manual;
②
Sanitary water tank should be equipped with internal electric heater to secure enough heat
energy in the very cold days;
CASE 3: Connecting Sanitary Water Tank and Heat Emitters for Heating and Cooling
Two-way valve is very important to prevent dew condensation on the floor and radiator while cooling
mode.
2 Model Selection
2.1 Speculations of Power Supply
Model
Power Supply
Model
Power Supply
V,Ph,Hz
V,Ph,Hz
GRS-CQ4.0d/NhG-K
220-240V,~,50Hz
GRS-CQ10Pd/NhG-M
380-415V,3N~,50Hz
GRS-CQ6.0Pd/NhG-K
GRS-CQ12Pd/NhG-M
GRS-CQ8.0Pd/NhG-K
GRS-CQ14Pd/NhG-M
GRS-CQ10Pd/NhG-K
GRS-CQ16Pd/NhG-M
GRS-CQ12Pd/NhG-K
GRS-CQ14Pd/NhG-K
GRS-CQ16Pd/NhG-K

Gree VERSATI III Series Specifications

General

Type	Air to Water Heat Pump
Series	VERSATI III
Refrigerant	R32
Operating Temperature Range (Cooling)	10°C to 48°C
Heating Capacity	4.0 - 16.0 kW
Cooling Capacity	4.0 - 14.0 kW
COP	Up to 4.5 (A7/W35)
EER	3.2 - 4.3
Power Supply	220-240V, 50Hz