11
ENGLISH
CONNECTION/PREPARATION
-----------------------------------------------------
Installation or hanging
7
Select a location so that no direct sunlight falls
on the screen.
Installation with stand
7
To mount the stand, refer to the installation
instructions included.
7
Place the TV set on a hard, level surface.
Preparing for mounting on the VESA
installation kit
Contact authorised dealer to purchase the
bracket.
You will need the following:
7
A pair of scissors,
7
A cross-tip screwdriver.
Follow the installation instructions for the VESA
installation kit.
1 Place the TV set on a smooth surface with
the screen facing down without removing
the film on it.
2 Cut open the film on the back side using the
scissors.
3 Connect the required cables to the
connectors on the TV set. See the
“Connections” section in this manual.
4 Tie the cables so they do not hang down
onto the floor.
5 Screw the VESA installation kit onto the TV
set and mount it according to its installation
instructions.
VESA
To Next Page
Loading...
Need help?
General