Grundig 43 VLX 7010 User Manual

ENGLISH
70
Wired network settings
There are two ways of making the wired
network settings.
A Automatic connection,
all data regarding connection settings
(»IP Address«, »Netmask«, »Gateway«
and »DNS«) are obtained from modem
automatically.
B Manual connection,
all data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) must be configured manually.
Automatic connection
Most home networks are Dynamic Networks.
If you have a dynamic network, you must use
a DSL modem that supports DHCP. Modems
and IP sharers that support DHCP obtain the »IP
Address«, »Netmask«, »Gateway« and »DNS«
values required for internet access automatically,
and thus you are not required to enter those
values manually. Your TV will automatically
connect to the network.
Note:
7
If you do not have a dynamic network,
follow the instructions in manual connection
section.
NETWORK SETUP
-------------------------------------------------------------------------------------------
Manual connection
Certain networks require a Static IP address.
If your network requires a Static IP address,
you must enter the »IP Address«, »Netmask«,
»Gateway« and »DNS« values manually. You
can get »IP Address«, »Netmask«, »Gateway«
and »DNS« values (ISS) from your Internet
Service Provider.
1 Press »
«.
2 Press »
>
« to select »Settings«.
3 Press »
V « then »
>
« to select »Network«
and confirm with »

«.
– »NETWORK« menu will be displayed.
Network
NETWORK
Configure Network
Wired (Connected)
Press SELECT to manually
configure your Ethernet
connection.
Check network status.
unplug your network cable to
connect to Wi-Fi
4 Confirm »Configure Network« with »

«.
5 Enter the IP address. Press »
<
«, »
>
«, » V «
or »
Λ « to select the required character and
press »

« to move to the next character.
6 Press »
8!« to select »Next«.
7 Enter the Network Prefix Length. Press
»
<
«, »
>
«, » V « or » Λ « to select the
required character or press »

« to move to
the next character.
8 Press »
8!« to select »Next«.
9 Enter gateway address. Press
»
<
«, »
>
«, » V « or » Λ « to select the
required character or press »

« to move to
the next character.
10 Press »
8!« to select »Next«.
11 Enter DNS 1 address. Press
»
<
«, »
>
«, » V « or » Λ « to select the
required character and press »

« to move
to the next character.
12 Press »
8!« to select »Next«.

Grundig 43 VLX 7010 Specifications

General

Brand	Grundig
Model	43 VLX 7010
Category	TV
Language	English