ENGLISH
64
Equipment control
Your television is equipped with an equipment
control function. You can use this function to add
the remote of your Fire TV and external devices
that Alexa can control.
1 Press »
«.
2 Press »
>
« to select »Settings«.
3 Press »
V
« then »
>
« to select »Equipment
Control« and confirm with »
«.
– »EQUIPMENT CONTROL« menu will be
displayed.
Equipment Control
EQUIPMENT CONTROL
Add Equipment
Add additional devices that
Fire TV and Alexa can switch
to or control.
4 Confirm »Add Equipment« with »
«.
– »ADD EQUIPMENT« menu will be
displayed.
Note:
7
Additional procedures are explained in the
following sections.
USING EXTERNAL DEVICES
---------------------------------------------------------------
Soundbar control
You can use your Fire TV remote or Alexa to
turn on/off your Soundbar, adjust its volume
and change inputs. Installation will take 5 to 10
minutes.
1 Confirm »Soundbar« with »
«.
– »Which brand of soundbar do you
have?« will be displayed.
2 Press »
V
« or »
Λ
« to select the soundbar
brand and press »
« to confirm.
Note:
7
If the brand of your soundbar is not in the
list, please select »Brand not listed«.
3 Confirm »Next« with »
«.
4 To turn off the soundbar, press »
8« on the
Fire TV remote.
5 Wait for 10 seconds and then press »
8« to
turn the soundbar on again.
– »Did your soundbar turn off and then
back on when you pressed »
8«?« will be
displayed.
6 If the Soundbar is turned on with the Fire TV
remote, select »Yes«;
or
If there was no response, select »No« and
press »
« to confirm.
7 Press »+« and »-« on the Fire TV remote to
change the volume for the soundbar.
8 If the volume of the soundbar is changed
with the TV remote, select »Yes«;
or
If there was no response, select »No« and
press »
« to confirm.
9 »Your Fire TV remote has been updated«
will be displayed.
10 To complete installation, confirm »OK« with
»
«.