Haier YR-E17 - 10 C Heating Function (Only Valid for Part of Models)

28
Operation
(1) Only in heating mode, this function is valid in function
circulation.
(2) For the four-way cassette model, press the SET key for
5s to enter the function circulation. When it switches to the
10°C heating function, 10°C will ash in the temp. display
area. Press the SET key to conrm, and 10°C will be statically
displayed.
(3) If the wired controller receives the signal of 10°C heating
function sent by the remote controller, 10°C will be statically
displayed in the temp. display area of the wired controller.
(4) If the wired controller is displaying room temp., when
the 10°C heating function is set. The 10°C will be statically
displayed for 3s ,then it changes to display room temp.. If the
temp. area displays room temp., press the Up/Down key rst,
the 10°C heating icon will be displayed. Press the Up/Down key
again, exit the 10°C heating function. Meanwhile, the set temp.
will be displayed statically, at this moment, the SET character
ashes for 3s, then the room temp. and ROOM character
displays. Press the mode key to change the mode directly, and
at the same time exit the 10°C heating function; press the Fan
key or Time key, the command will be executed; press the Set
key and the Up/Down key to switch to the 10°C function, press
the function key again, the function will be canceled.
10°C Heating Function (Only valid for part of models)