29
Operation
(5) If it’s not the four-way cassette model, press the Set key
once to enter the function circulation. When it switches to the
10°C heating function, the temp. display area will statically
display 10°C. Then press the Set key to conrm. The exist
operations will be the same as the four-way cassette model.
(6) This function can be remembered when it is turned on/off.
(1) When it is powered on for the rst time, four-way cassette
icon and Up/Down swing will be displayed. The number1,2,3,4
next to the swing referred to different wind deectors will be
displayed(if the wind deector is on the position 1, the Up/
Down swing will stay the angle set by the wind deector
position 1.Meanwhile the number 1 next to the Up/Down
swing will be displayed. If it is selected as four sides controlled
together, the number 1, 2, 3 ,4 next to the Up/Down swing will
be displayed at the same time). Set key now can only switch
among four wind deectors. Use Up/Down key to set the angle
of the current wind deector.
Four-way cassette - Function (Only valid for part of
models)