44 / 72
2. Insert the USB storage device into the front panel USB Host interface, if thedevice is recognized
successful, the pop-uptip “Storage device is connected”.
3. Press the Save softkey to enter save menu.
4. Press the Type softkey to select Save Type to Picture.
5. Press the Screen Inverted softkey, select OFF or ON.
OFF: The color of the saved picture is the color of the screen.
ON: The color of the saved picture is the opposite color of the screen.
6. Press the Save softkey to save the picture to the external USB storage device.
Screenshot
Press SAVE TO USB on the front panel to automatically take a screenshot to save the picture to an
external storage device.
2.9.4. File Manager
2.9.4.1. Create a New File
This operation is only valid in external storage. DSOXXXX supports English input method. The file name
or folder name can contain letters, numbers and underscores. Let’s use an example to introduce how to
create a file or folder.
Create a file named “DSOXXXX01”
1. Insert the USB storage device, press the Save softkey in “Save/Recall” menu to enter the Save
function menu.
2. Press the Type softkey, and then turn the Multifunctional Knob to select one type.
3. Use the SaveTo softkey to external location. Press Save softkey and into File Manager interface.
4. Press the New softkey to open the interface shown as the picture below. It divides into two parts:
name input area and keyboard area. The default is keyboard area. As the picture shows below, “Aa" is
used to switch upper-lower case.
5. Turn V0 to select “Aa” and press V0 to confirm to set the input method to upper case.Turn V0 to
select “DSOXXXX01” and then press V0 to input the characters successively.
To Next Page
Loading...
Need help?
General
