5 - Operation
5.3
Liquid system
Filling of water
Tank should normally be filled 1/3 with water before adding chemicals.
Always follow instructions given on the chemical container!
±
WARNING! If the sprayer is put aside with liquid in the main tank, all MANIFOLD valves must be closed.
Filling through tank lid
Water is filled into the tank by removing the tank lid located at front of
sprayer tank which is accessible from platform. It is recommended to use
water as clean as possible for spraying purposes. Always fill water
through the strainer basket to prevent foreign particles from entering
the tank. An overhead tank can be used in order to obtain high filling
capacity.
±
WARNING! Do not let the filling hose enter the tank. Keep it outside the tank, pointing towards the filling hole. If the
hose is lowered into the tank and the water pressure drops at the water supply, chemicals may be siphoned back and
contaminate the water supply lines and source.
To Next Page
Loading...
Need help?
General
