Harvia Xenio WiFi User Manual

40
EN
Basic mode (heater and steamer on)
The top row shows the sauna room temperature. The bottom row shows the humidity
level (or remaining on time, if the steamer is not activated).
2.5. Basic settings
Figure 3a. Settings menu structure, basic settings.
Basic mode (pre-setting time running, heater and steamer off)
The decrease of remaining pre-setting time is shown until zero appears, after
which the activated devices (heater and/or steamer) are switched on. The bottom
row shows the remaining pre-setting time.
Press the MENU button to open the settings menu.
Sauna room temperature (shown if the heater is activated)
The display shows the sauna room temperature setting. Temperature indicator
light blinks.
• Change the setting to the desired temperature with the and buttons.
• The sum of temperature and humidity can be 140 at maximum (» 2.2.)
Press the MENU button to access the next setting.
Sauna room humidity level (shown if the steamer is activated)
• The display shows the sauna room humidity setting. Humidity indicator light blinks.
• Change the setting to the desired humidity with the and buttons.
• The sum of temperature and humidity can be 140 at maximum (» 2.2.)
Press the MENU button to access the next setting.
Remaining on-time
Press the and buttons to adjust the remaining on-time.
Example: the heater will be on for 3 hours and 40 minutes.
Pre-setting time (timed switch-on)
• Press the button until you overstep the maximum on-time. Temperature
and humidity indicator lights switch off. Pre-setting time symbol blinks on the
screen.
• Select the desired pre-setting time using the and buttons . The time
changes in 10-minute steps.
Example: the heater will start after 10 minutes.
Press the MENU button to exit.
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I

Harvia Xenio WiFi Specifications

General

Brand	Harvia
Model	Xenio WiFi
Category	Control Panel
Language	English