Hettich MIKRO 185 User Manual

EN
26/38 Rev. 02 / 11.2022 AB1203EN_SA
START
PULSE
 Press the button to save the setting.
t/min:s RPM >RCF< t/min:s RPM >RCF<

STOP
OPEN
 Press the key once to exit the "
Settings"
menu or press twice to exit the "
MACHINE MENU
".
t/min:s RPM >RCF<
Example:
t/min:s RPM >RCF<
20.3 Optical signal after ending the centrifugation run
The backlighting of the display flashes after the centrifugation run to visually signalize that the centrifugation run has
finished.
The optical signal can be switched on or off when the rotor is at a standstill:
The procedure can be aborted at any time by pressing the
STOP
OPEN
key.
SELECT
 Press and hold the button for eight
seconds.
t/min:s RPM >RCF<

SELECT
 Press the key until the following is
displayed.
t/min:s RPM >RCF<

START
PULSE
 Press the key.
t/min:s RPM >RCF< t/min:s RPM >RCF<

SELECT
 Press the key until one of the following is
displayed:
End blinking : Backlighting of display
flashes after the centrifugation run.
off : Backlighting does not flash.
on : Backlighting flashes.
t/min:s RPM >RCF< t/min:s RPM >RCF<

t
 With the keys, set off or on.
t/min:s RPM >RCF< t/min:s RPM >RCF<

START
PULSE
 Press the button to save the setting.
t/min:s RPM >RCF<
t/min:s RPM >RCF<

STOP
OPEN
 Press the key once to exit the "
Settings"
menu or press twice to exit the "
MACHINE MENU
".
t/min:s RPM >RCF<
Example:
t/min:s RPM >RCF<

Hettich MIKRO 185 Specifications

General

Brand	Hettich
Model	MIKRO 185
Category	Laboratory Equipment
Language	English