HIKVISION DS-2CD20 Series User Manual

User Manual of Network Camera
121
Note:
Only live view is available for the anonymous user.
11.4 IP Address Filter
Purpose:
This function makes it possible for access control.
Steps:
1. Enter the IP Address Filter interface:
Configuration> Advanced Configuration> Security > IP Address Filter
Figure 11-7 IP Address Filter Interface
2. Check the checkbox of Enable IP Address Filter.
3. Select the type of IP Address Filter in the drop-down list, Forbidden and Allowed
are selectable.
4. Set the IP Address Filter list.
 Add an IP Address
Steps:
(1) Click the Add to add an IP.
(2) Input the IP Adreess.

HIKVISION DS-2CD20 Series Specifications

General

Brand	HIKVISION
Model	DS-2CD20 Series
Category	Security Camera
Language	English