HIKVISION DS-2CD20 Series User Manual

User Manual of Network Camera
75
Figure 6-45 Day/Night Scheduled-Switch
(3) Select the start time and the end time for the switch timing.
(4) Select the area by clicking the area No.
(5) Slide the cursor to adjust the sensitivity and proportion of object on the area for the
selected area in the daytime.
(6) Slide the cursor to adjust the sensitivity and proportion of object on the area for the
selected area at night.
(7) Set the arming schedule and linkage method as in the normal configuration mode.
(8) Click Save to save the settings.
6.6.2 Configuring Video Tampering Alarm
Purpose:
You can configure the camera to trigger the alarm when the lens is covered and take
alarm response action.
Steps:
1. Enter the video tampering Settings interface:
Configuration > Advanced Configuration > Events > Video Tampering

HIKVISION DS-2CD20 Series Specifications

General

Brand	HIKVISION
Model	DS-2CD20 Series
Category	Security Camera
Language	English