User Manual of DS-7000HI-S Series Net DVR
Page 34
4. Enable the auto backup: Pressing “confirm” or “edit” button to enable(“”) or disable(“×”)
the function.
5. Select camera you want to auto backup by using
or button and enable(“”) it by
pressing “confirm” or “edit”.
6. Day Set: select how many days you want to auto backup, there are options:1,2,3,4,5,6,7.
7. Time set: select the time period (only available when select 1 day). You can just input the start
time and end time (hh:mm:ss).
8. Backup Delay: you can select time delay for auto backup by using
or button, there are
options: 0min, 10min, 20min, 30min,40,50,60,70,80,90.
9. Save the settings by pressing “Confirm” or you can cancel it if you want.
Playback the video segment
You can use our file player software to playback the video segment in PC. You can find the
player software in attached CD.
Exit playback interface
Please refer to chapter 4.6.
4.8 Shut down DVR
Note: Do not switch off the power directly in case of damaging HDD. The correct step is
To Next Page
Loading...
Need help?
General